On November 19, 2026, the U.S. Department of Commerce, Bureau of Industry and Security (“BIS”) published the interim final rule (“IFR” or the “Rule”), 91 Fed. Reg. 74970, “Addressing Remote Access to Advanced Semiconductors.” The IFR, which is effective immediately, is designed to ensure that existing restrictions on access to advanced U.S. computing technology cannot be circumvented through remote computing arrangements with data centers in third countries. Comments are due no later than Tuesday, January 19, 2027.
The IFR amends the Export Administration Regulations (“EAR”), 15 C.F.R. Parts 730 – 774, making five principal changes to controls on advanced super intelligence (“SI”) semiconductors and related items classified under Export Control Classification Numbers (“ECCNs”) 3A090 (excluding 3A090.c, which controls certain High Bandwidth Memory (“HBM”)) and 4A090, related .z paragraphs, and corresponding software and technology (hereinafter, “Advanced SI Items”).
- Destination and nationality controls. The IFR imposes a new destination-based license requirement for exports, reexports, and transfers (in-country) of Advanced SI Items to or within Brazil, Indonesia, Malaysia, Singapore, and Thailand, which BIS identified as presenting a higher-than-normal risk of diversion. The license requirement for these five countries does not apply when the ultimate consignee and end user are headquartered, or whose ultimate parent company is headquartered, in the United States, provided that required monthly reports are filed with BIS. The Rule also adds the United Arab Emirates (“UAE”) to the restored Regional Stability controls for Advanced SI Items discussed below. These controls do not apply, however, to approved UAE entities that are listed in Supplement No. 8 to Part 740 of the EAR and specified as eligible to receive these items.
- Data center end use control. The IFR creates a new end-use control in Section 744.24 of the EAR, requiring a license to export, reexport, or transfer (in-country) Advanced SI Items to a data center anywhere outside of the United States that provides, or will provide, access to more than 12,000,000 aggregate total processing performance (“aggregate TPP”), at one data center or through linked data centers, to or for companies headquartered, or whose ultimate parent is headquartered, in Macau or a Country Group D:5 destination, including China. Data centers that are currently providing the specified processing performance to such companies have 90 days from the effective date (i.e., until February 17, 2027) to obtain a license from BIS.
- Narrowing of advanced node carve out. The IFR limits the ways front-end foundries and outsourced assembly and test (“OSAT”) providers can overcome the presumption that advanced-node logic chips are controlled under ECCN 3A090.a, and it imposes license requirements for foundries and OSATs to export, reexport, or transfer such chips that are designed by non-approved or non-authorized chip designers.
- Formal rescission of Biden-era AI diffusion rule. The IFR formally rescinds the regulations implementing the January 2025 “Framework for Artificial Intelligence Diffusion” (the “AI Diffusion Rule”), including the model-weights control in ECCN 4E091, the country tiers and corresponding license exceptions, and the Data Center Validated End-User (“VEU”) authorization.
- Clarification of existing controls. The Rule further clarifies certain existing controls on Advanced SI Items, including by (a) broadly restoring the pre-AI Diffusion Rule destination-based controls on destinations in Country Groups D:1, D:4, or D:5, excluding any destination also specified in A:5 or A:6, and (b) stating that the end-use control for advanced computing items in Section 744.23(a)(3) of the EAR (the “Advanced Computing End Use Control”) applies to transactions “on behalf of” companies headquartered, or whose ultimate parent is headquartered, in Macau or a D:5 country, including China.
We discuss each of these actions in greater detail below.
Destination-Based License Requirements
Changes to Regional Stability (“RS”) Controls
How have the RS controls changed in the IFR?
The Rule generally reverts the RS controls for exports, reexports, or transfers (in-country) of Advanced SI Items to the requirements set forth prior to the AI Diffusion Rule (i.e., to or within destinations in Country Groups D:1, D:4, or D:5, excluding any destination also specified in A:5 or A:6). However, the Rule also adds the United Arab Emirates (“UAE”) to this control.
A separate new RS control applicable to Brazil, Indonesia, Malaysia, Singapore, and Thailand is discussed below in Section 1.B.
Is a license required for all exports, reexports, or in-country transfers of Advanced SI Items to the UAE?
No. A license is not required where the ultimate consignee and all end users are approved UAE entities in Supplement 8 to Part 740 of the EAR and specified as eligible to receive these items.
What is BIS’s licensing review policy for the RS control?
BIS applies different licensing review policies based on the performance of the commodity – measured by aggregate TPP, as defined in the Technical Notes to ECCN 3A090 – and destination:
- Case-by-Case: For exports of commodities with a TPP of less than 21,000 and total DRAM bandwidth of less than 6,500 GB/s destined to end users in China or Macau, BIS will review license applications on a case-by-case basis, provided the applicant provides the additional information required in Supplement No. 2 to Part 748 of the EAR under paragraph (dd), including certifications and supporting information regarding performance specifications, product availability and supply, end use, know your customer diligence, remote access, security, and pre-export testing.
This required information was previously added to the EAR on January 15, 2026, as part of BIS’s revised licensing policy for NVIDIA H200 and equivalent chips.
- Presumption of Denial: For all other applications to destinations in Country Group D:5 or Macau or for entities headquartered, or with an ultimate parent headquartered, in Country Group D:5 or Macau, BIS will review license applications with a presumption of denial.
- Presumption of Approval: For all other applications to or within destinations specified in Country Groups D:1 and D:4 (excluding any destinations also specified in Country Groups A:5 or A:6) and the UAE, BIS will review license applications with a presumption of approval.
Have the RS controls applicable to High-Bandwidth Memory (“HBM”) changed?
No. Items classified under ECCN 3A090.c (i.e., HBM) continue to be subject to license requirements only for destinations in Country Group D:5 and Macau. License Exception HBM (§ 740.25) and Advanced Compute Manufacturing (“ACM”) (§ 740.28) remain available. As discussed below, however, the Advanced Computing End Use Control continues to apply to HBM controlled in 3A090.c. Moreover, co-packaged ICs combining HBM and logic whose dominant function is processing are not classified under 3A090.c and will be subject to the new controls.
Addition of RS Controls on Countries Deemed to Present Higher-Than-Normal Risk of Diversion
Are any other countries subject to RS controls for Advanced SI items?
The Rule adds a license requirement for RS reasons to export, reexport, or transfer (in-country) Advanced SI Items to or within Brazil, Indonesia, Malaysia, Singapore, and Thailand. BIS added these countries to the RS controls given concerns that they are involved in the diversion of Advanced SI Items to entities and countries of concern without authorization.
Are there any exceptions to the license requirement applicable to Brazil, Indonesia, Malaysia, Singapore, and Thailand?
The license requirement does not apply to ultimate consignees or end users that are headquartered, or whose ultimate parent company is headquartered, in the United States, provided that monthly reports are filed with BIS regarding such exports, reexports, or transfers (in-country) as set forth in new Section 743.10 of the EAR. These monthly reports must contain information including, for example, details of the parties involved in the transaction (including ultimate parent companies), the ECCN, product name, TPP, and quantity of the Advanced SI Items being exported, reexported or transferred (in-country), and shipment or transfer dates for the covered items. Reports are due no later than the first business day of the month following the transaction.
How are license applications for Brazil, Indonesia, Malaysia, Singapore, and Thailand reviewed?
BIS will review license applications on a case-by-case basis, considering the country’s export control regime effectiveness and coordination with BIS on enforcement.
Will other countries be identified as “diversion risk countries” in the future?
Potentially. BIS indicates that additional countries presenting a higher-than-normal risk of diversion may be designated by the Secretary of Commerce in consultation with the Secretary of State or the Assistant to the President for National Security Affairs. BIS also warned that countries that tolerate evasion may face consequences such as import restrictions, new license requirements on advanced semiconductor exports, a downgraded status under U.S. export controls, and Entity List designations and temporary export prohibitions for foreign persons involved.
End Use Controls
New Data Center End Use Control
What is the new end use control on data centers?
A license is now required to export, reexport, or transfer (in-country) Advanced SI Items when there is “knowledge” that the item is destined to a data center anywhere outside the United States that provides, or will provide, access to greater than 12,000,000 “aggregate TPP” (defined below), at one data center or through ‘linked data centers,’ to or for companies headquartered, or whose ultimate parent is headquartered, in Macau or a destination in Country Group D:5, including China. Although the Rule text refers to data centers in “any destination worldwide,” the control is triggered by exports, reexports, and transfers (in-country), so as a practical matter it reaches data centers located outside the United States. A ‘linked data center’ is one that uses digitally- or physically-linked networking infrastructure to connect two or more data centers so they share resources, balance workloads, and replicate data as a unified whole.
Are there any exceptions to the Data Center End Use license requirements?
The license requirement does not apply where the computing-power access is only being provided for a commercial recommender system, so long as the provider submits to BIS the D:5 country or Macau customer’s name, the aggregate TPP provided, and the due diligence performed. A “commercial recommender system” means a “ tool exclusively designed and exclusively used to rank, filter, or suggest commercial products, services, or content to users based on user behavior, transaction history, or item attributes.” It does not include any SI system designed or used to generate novel text, image, audio, video, software, or other content, or any system that incorporates such a model, regardless of whether the system also performs recommendation functions. No license exceptions are otherwise available, and license applications are reviewed on a case-by-case basis.
Why is the TPP threshold set at 12,000,000 aggregate TPP?
BIS set the TPP threshold at a level it determined would allow for the training or running of advanced SI models. In other words, the threshold is expressly intended to target advanced SI model workloads. The “aggregate TPP” of the ICs or commodities is the sum of the TPP of all of the ICs or commodities specified in ECCNs 3A001.z, 3A090 (except 3A090.c), 4A003.z, 4A004.z, 4A005.z, 4A090, 5A002.z, 5A004.z, or 5A992.z in the group.
What are the due diligence requirements in the rule?
The Rule explicitly states that to satisfy the no “knowledge” requirement, companies will be expected to obtain, and be able to provide, sufficient information from the non-U.S. data center regarding that data center’s “know your customer” due diligence checks, including whether any data center customers are directly or indirectly owned or controlled by persons located, headquartered, or whose ultimate parent is headquartered, in Macau or a D:5 country. If a non-U.S. data center declines or is unable to provide sufficient information to verify compliance with this end use control, the red flag presumptively provides “knowledge” unless it is resolved before proceeding.
Does the Rule cover the training of SI models provided by customers in non-D:5 countries to entities in D:5 countries?
Yes. BIS advised that access will be considered “for” a D:5- or Macau-headquartered company (e.g., a Chinese company) where a customer located elsewhere trains AI models for, participates in training SI models for, or provides SI models to that company.
Do the license requirements extend beyond the original transaction?
Yes. The Data Center End Use Control license requirements apply regardless of whether the person in possession of the Advanced SI Item that is subject to the EAR was a party to the original export, reexport, or transfer (in-country). The license requirements also apply after such item has been incorporated into or commingled with a non-U.S.-made item, and the EAR’s de minimis rules may not be relied upon where there is “knowledge” at any point in the chain of the prohibited end use. The control therefore follows the item downstream to data center owners and operators, who should in turn conduct due diligence on tenants and end users.
What if the initial export of Advanced SI Items does not require a license, but a subsequent change grants a Macau or D:5 country entity access covered by this end use control?
A license is required when there is such a change in access. Even if the initial export of the Advanced SI Items to the data center did not require a license under this end use control (for example, because they would not be accessed by a Chinese company), a subsequent change in access can trigger licensing requirements at that time. BIS explained that a change from a non-prohibited to a prohibited end use is a “transfer (in-country)” requiring authorization. Accordingly, under Section 744.24(e) of the EAR, for any export, reexport, or transfer (in-country) of an Advanced SI Item made on or after November 19, 2026 without a license, the exporter, reexporter, or transferor must notify the recipient of the item that BIS authorization is required if the items will be used to provide more than 12,000,000 aggregate TPP to or for prohibited end users, that the transferor (e.g., the data center operator) must obtain that authorization, and that the recipient must follow the know-your-customer guidance in Supplement No. 3 to Part 732 of the EAR.
What if a data center provides, or will provide, access below the 12,000,000 aggregate TPP threshold?
If a data center provides, or will provide, remote access to Advanced SI Items to companies headquartered, or whose ultimate parent is headquartered, in Macau or a D:5 country, including China, BIS advises evaluating the applicability of both the Data Center End Use Control (§ 744.24) and the Advanced Computing End Use Control (§ 744.23). As discussed below in Section II.B, the Advanced Computing End Use Control may apply even where the level of remote access does not meet the TPP threshold that triggers the Data Center End Use Control.
What steps do non-U.S. data centers that already serve entities headquartered in D:5 countries or Macau need to take to comply with the Rule?
The Rule provides that for data center operators outside of the United States already providing significant volume of compute to companies headquartered in a D:5 country or Macau that wish to continue such service, the operator must obtain a license within 90 days of the effective date (November 19, 2026), i.e., by February 17, 2027, or face future export restrictions. The Rule does not specify those restrictions. BIS could, for example, use the “is informed” process described below to require licensing.
What is the “is-informed” process?
Under the new Section 744.24(a)(2) of the EAR, BIS may inform persons, individually by specific notice or through an EAR amendment, that a license is required for specified items to certain persons or destinations because of an unacceptable risk of use in, or diversion to, prohibited data center end use. Verbal notices will be followed by written notice within two working days. The Secretary of State or the Assistant to the President for National Security Affairs may notify Commerce that a destination is high-risk, and within 10 days Commerce may, if appropriate, impose such a license requirement. The absence of an is-informed notice does not excuse compliance with the Data Center End Use Control.
Advanced Computing End Use Control
What is the Advanced Computing End Use Control discussed in the Rule?
BIS’s preexisting Advanced Computing End Use Control imposes a license requirement on the export, reexport, or transfer of:
- Items classified under ECCNs 3A090 (except 3A090.c), 4A090, and related .z paragraphs to any destination other than a destination in Country Groups D:1, D:4, or D:5 (excluding destinations also in Country Groups A:5 or A:6) when there is “knowledge” that the item is for a company headquartered, or whose ultimate parent is headquartered, in Macau or a D:5 country, including China; and
- Items classified under ECCN 3A090.c (i.e., HBM) to any destination other than to a destination in Country Group D:5 or Macau when there is “knowledge” that the item is for a company headquartered, or whose ultimate parent is headquartered, in Macau or a D:5 country, including China.
Does the Rule clarify which entities are covered by BIS’s preexisting Advanced Computing End Use Control?
Yes. BIS has clarified that the Advanced Computing End Use Control on Advanced SI items destined “for an entity” headquartered, or whose ultimate parent is headquartered, in Macau or a D:5 country, including China, extends to exports, reexports, or transfers (in-country) “on behalf of” such entity. BIS specifically explained that a transaction is “on behalf of” an entity headquartered, or whose ultimate parent is headquartered, in Macau or a D:5 country where the entity is (1) the purchaser (directly or indirectly), or (2) the exclusive or primary (greater than 50% of total compute) remote end user of the advanced chips.
BIS explained that the Advanced Computing End Use Control was always intended to cover such conduct, and it has never been limited only to exports, reexports, and transfers (in-country) destined to such entities of concern as ultimate consignees or end users.
Under this clarified guidance, what should a company engaged in a transaction involving Advanced SI Items “on behalf of” a covered entity do?
BIS advises that any entity engaged in transactions involving Advanced SI Items “on behalf of” a covered entity that did not previously have authorization from BIS to do so should submit a Voluntary Self-Disclosure under Section 764.5 of the EAR.
However, BIS separately stated that bona fide data center operators providing remote access for commercial recommender systems may continue those services for 90 days but must then obtain a license. As such services are excluded from the Data Center End Use Control in Section 744.24(b)(2), this 90-day license requirement is likely only triggered under the Advanced Computing End Use Control when the service is “on behalf of” companies headquartered, or whose ultimate parent is headquartered, in Macau or a D:5 country, including China. It would appear, therefore, that an entity whose violation of the Advanced Computing End Use Control arises solely from providing services for a commercial recommender system may obtain a license within 90 days rather than submit a VSD. However, given the ambiguity regarding the scope of this 90-day license requirement, it may warrant clarification in comments.
New Integrated Circuit Designer End-Use Control
What is the new end-use control for IC designers?
Under new Section 744.23(a)(3)(i)(C) of the EAR, a license is required for a “front end fabricator” or “OSAT” to export, reexport, or transfer (in-country) to or within any destination an “applicable advanced logic integrated circuit” that is subject to the EAR, classified under ECCN 3A090.a, and designed by a company that is neither an approved integrated circuit (“IC”) designer nor an authorized IC designer. “Applicable advanced logic integrated circuits” are logic integrated circuits produced using the “16/14 nanometer node” or below, or using a non-planar transistor architecture.
What is an approved or authorized IC designer?
Approved IC designers are designers that are specified in Supplement No. 6 to Part 740 of the EAR. Supplement No. 6 was added to the EAR on January 16, 2025 to provide a list of designers vetted by the U.S. government that could overcome the 3A090.a presumption in Note 1 that an “applicable advanced logic integrated circuit” is classified under ECCN 3A090.a and designed or marketed for datacenters.
Authorized IC designers are designers that meet the criteria under Note 1 to 3A090.a. to overcome the 3A090 presumption. Until December 31, 2026, this includes all IC designers that (1) are headquartered in Taiwan or an A:1 or A:5 country and are neither located in, nor have an ultimate parent headquartered in, Macau or a D:5 country, and (2) have agreed to submit applicable information described in Section 743.9(b) of the EAR to the “front-end fabricator,” which the “front-end fabricator” must then report to BIS. After December 31, 2026, such designers must also have applied to become approved IC designers, and will lose authorized status 180 days after applying.
Fewer Pathways to Overcome Presumption that Advanced-Node Logic Chips are Controlled
What is the Advanced-Node Logic Chip Presumption?
On January 16, 2025, BIS added a note to ECCN 3A090 indicating that an “applicable advanced logic integrated circuit” is presumed to be classified under ECCN 3A090.a and designed or marketed for data centers when exported, reexported, or transferred (in-country) by a “front-end fabricator” or an outsourced assembly and test (“OSAT”) company.
Foundries and OSATs can overcome the 3A090.a data center presumption only through an approved or authorized designer performance attestation, a front-end fabricator transistor-count attestation, or an approved OSAT transistor-count attestation. The transistor-count attestations require that the final packaged IC have fewer than 30 billion transistors or, if it contains no HBM, fewer than 35 billion (2027) or 40 billion (2029 and thereafter). The Rule does not state a 2028 threshold, which may be an oversight carried over from the initial January 2025 rule and require clarification.
How does the Rule change the presumption of control for advanced-node logic chips?
Under the Rule, the front-end fabricator transistor-count attestation and approved OSAT transistor-count attestation will no longer overcome the 3A090.a presumption if the IC designer is located, or has an ultimate parent headquartered, in a destination in Country Groups D:1, D:4, D:5, or subject to the RS diversion controls set forth above (i.e., the RS controls applicable to Brazil, Indonesia, Malaysia, Singapore, and Thailand).
Formal Rescission of AI Diffusion Rule
Was the AI Diffusion Rule removed from the EAR?
Yes, the IFR formalizes the rescission of most of the AI Diffusion Rule, which was not enforced under the Trump Administration. In addition to the specific revisions discussed above, the IFR specifically addresses the following elements of the AI Diffusion Rule:
- Model weights: Removes all controls applicable to the model weights classified under ECCN 4E091 and removes the ECCN, which was established by the AI Diffusion Rule. BIS states that destination-based or end-use license requirements are “a more effective approach” to model-weight transfers.
- Country tiers and related license exceptions: The Rule removes the worldwide control for advanced computing ICs set forth in the AI Diffusion Rule, along with the corresponding license exceptions to effectuate a tiered system by country, including License Exception AIA (§ 740.27) and License Exception LPP (§ 740.29).
- Data Center Validated End User (“VEU”): The Data Center VEU program has been removed, and the references to “General VEU Authorization” in the EAR revert to “VEU Authorization.”
Does any part of the AI Diffusion Rule remain?
Yes, the IFR retains the License Exception ACM under Section 740.28 of the EAR that was established by the AI Diffusion Rule. License Exception ACM built upon the temporary general license in the October 2023 IFR. It authorizes the export, reexport, and transfer (in-country) of items specified in ECCNs 3A090, 4A090, and related .z commodities, software, and technology to “private end users” not located in, headquartered in, or with an ultimate parent company headquartered in Macau or a D:5 country if the ultimate end use is development, production, or storage (e.g., in a warehouse), and the items are ultimately destined to customers outside of Macau or a D:5 country.
BIS explained that it has retained this license exception due to the role it plays in supporting the supply chains of exports, reexports, and transfers (in-country) of advanced SI items destined to ultimate end users outside of Macau or D:5 countries.
Foreign Direct Product (“FDP”) Rules
Did the Rule make any changes to the FDP rules?
Other than removing the AI model weights FDP rule in Section 734.9(l) of the EAR, the Rule did not make any formal changes to the FDP Rules at Section 734.9 of the EAR, and it retains the Advanced Computing FDP rule. BIS reminded companies that an IC subject to the EAR pursuant to the Advanced Computing FDP rule remains subject to the EAR even after it is incorporated into a non-U.S. produced board or server. Accordingly, a license requirement may apply by extension to the non-U.S. produced server.
Key Takeaways
- The Rule marks a significant expansion of U.S. advanced computing controls, maintaining the existing focus on where chips are shipped while introducing an additional layer of controls focused on who ultimately accesses and uses the resulting compute.
- The Rule closes the remote-access pathway through a new worldwide, headquarters-based data center end-use control keyed to a 12,000,000 aggregate TPP threshold designed to capture the training or running of advanced SI models.
- The Rule adds case-by-case licensing for Brazil, Indonesia, Malaysia, Singapore, and Thailand. U.S.-headquartered recipients are excluded, provided they meet the monthly reporting requirement. For the United Arab Emirates, licensing is subject to a presumption of approval, and approved UAE entities are not subject to a license requirement.
- The Rule tightens the foundry and OSAT presumptions for advanced-node logic chips and imposes associated export controls for advanced-node logic chips designed by non-approved or non-authorized IC designers.
- The Rule clarifies that Advanced SI Items exported, reexported, or transferred (in-country) on behalf of a company headquartered, or whose ultimate parent is headquartered, in Macau or a D:5 country are subject to licensing requirements.
- The Rule formally rescinds most of the AI Diffusion Rule, eliminating the model-weights control, country tiers and related license exceptions, and the Data Center VEU.
Next Steps
Because the Rule is effective on publication and imposes short transition periods, IC exporters, foundries, OSATs, cloud providers, and data center operators worldwide should promptly assess their exposure, strengthen customer and supply chain diligence, and prepare any necessary license applications, reports, and comments.
- Companies and individuals that would be impacted by this Rule are encouraged to submit comments no later than Tuesday, January 19, 2027.
- Data centers should inventory and classify their holdings and transactions involving Advanced SI items under 3A090, 4A090, and related .z items, and calculate their aggregate TPP by facility and across linked facilities.
- Companies should review their customer due diligence procedures. Data center and cloud operators should implement “know your customer” procedures that identify headquarters and ultimate parent companies, trace direct and indirect ownership and control, and screen for customers training or supplying models for a company headquartered, or whose ultimate parent is headquartered, in Macau or a D:5 country. IC exporters and foundries should be prepared to obtain and document that information because a data center’s inability to provide sufficient information is a red flag that presumptively provides “knowledge” of use of Advanced SI items by companies headquartered, or whose ultimate parent is headquartered, in Macau or a D:5 country unless the red flag is resolved before proceeding with a transaction.
- Companies should review their prior transactions related to Advanced SI items. Given BIS’s statement that the “Advanced Computing End Use Control” has always covered transactions “on behalf of” covered entities, companies should evaluate their historical arrangements and consider voluntary self-disclosures where appropriate. Data centers currently serving companies headquartered in, or whose parent company is headquartered in, a D:5 country or Macau and who intend to continue serving such companies should coordinate any necessary disclosures with the license applications required under the Data Center End Use Control before the 90-day window closes on February 17, 2027.
- Companies engaging in relevant transactions in Brazil, Indonesia, Malaysia, Singapore, and Thailand with ultimate consignees or end users headquartered in the United States should prepare monthly reports to BIS. The license requirements for these five countries do not apply to ultimate consignees or end users that are headquartered, or whose parent company is headquartered, in the United States, provided that monthly reports are filed with BIS according to BIS’s requirements.
- Companies should consider updating their contracts. Adding, as applicable, end-use certifications, compute-allocation and audit rights, information-sharing obligations, notification language required by Section 744.24(e) of the EAR, and termination rights for noncompliant downstream use may be prudent in light of the Rule.
- Companies should continue to monitor their advanced computing-related transactions and compute allocations. Companies should consider implementing ongoing monitoring of compute allocation because a shift in customer mix can itself be a controlled transfer (in-country) requiring authorization.
- Interested parties should continue to monitor for further guidance or rule modification from BIS. Additional countries may be made subject to destination-based license requirements, and BIS has signaled Entity List and other actions against parties and jurisdictions that tolerate evasion of U.S. export controls.
Experienced counsel can assist in navigating these complex requirements and, when necessary, applying for an export license or other authorization, completing voluntary self-disclosures, or preparing monthly reports to BIS.
King & Spalding has a global footprint, substantial industry experience, and a deep bench of former trade and national security government officials. It is uniquely positioned to help guide companies in complying with these complex U.S. export control rules and advocate for revisions and clarity to controls when they create unintended consequences for companies’ global operations and workforce.
The Best and Latest Insights
All in One Place.